Testing Equipments
 
|   Coating Thickness Gages   |   Ultrasonic Wall Thickness Gages   |     Pull Off Adhesion Tester    |    Testex Tape    |   Dew Point Meter    |
   Coating Thickness Gages
 
Defelsko Corporation , a U.S manufacturer of Coating Thickness Gages and inspection instruments has been providing Simple, Durable and Accurate gages since 1966.
 
   PosiTector 6000 Series for All Metal (Ferrous and Non Ferrous) Substrates
 
 
 
 
 
 
 
 
  • Ideal for Measuring Paint, Powder Coating, Epoxy, Anodizing, Plating and More !
  • Measure Coating thickness on both Ferrous and Non Ferrous Metals
  • Ready to measure- no calibration adjustment required for most application
  • Solvent, acid, oil, water and dust resistant
  • Calibration Certificate
  • Mils/Micros/mm switchable
  • 2 Year Warranty
  • Built-in temperature compensation ensures measurement accuracy
  • All PosiTector 6000 Gages are available in your choice of Basic, Standard and Memory configurations.
  • The PosiTector 6000 Memory (3) models now include PosiSoft with a USB cable and a nylon carrying case.
  • The gage is now supplied with a rubber boot with belt clip (also: batteries, plastic shims, instructions, 2 year warranty and a certificate of calibration.
  • Separate probe and build in probe version available.
 
   
 
   Coating Thickness Gage for Concrete, Wood, Plastic and More
 

PosiTector 200 Series

  • Measures Coating Thickness over Wood, Concrete , Plastics, Composites and more.
  • Advance model measure 3 individual layer thickness in a multi layer system
  • Solven,acid,oil,water and dust resistant
  • Continually displays averages, standard deviation, and number of readings
  • Memory Stores up to 10000 readings
  • Built in clock
   
 
 
   PosiTest DFT Coating Thickness Gage for all Metals
   
  • Measures non magnetic coating on steel and non conductive coating on Aluminium, brass etc.
  • Flip Display
  • No calibration required
  • Zero feature for rough and curved surfaces
  • Handy RESET feature
  • 2 year Warranty
 

   Posipen Measuring Coating Thickness

   

PosiPen can be placed with pin-point accuracy on any location of the part to be measured which other Gages are not able to reach.
   

PosiPen measures

 Range
  • On hot surfac
  • 5 to 500 microns (metric)
  • On small surfaces
  • Tolerance ±10% and 2.5 microns
  • In different positions
  
   

PosiTest

PosiTest FM / GM - Magnetic pull-off thickness gage for the Non-destructive measurement of non-magnetic coatings (paint, enamel, plastic, galvanizing, metalizing, plating, etc.) on STEEL.